A Complete Guide to Assessment Validation and Validating Assessments

A Complete Guide to Assessment Validation and Validating Assessments

Blog Article

After gaining registration, RTOs need to monitor several aspects including annual declarations, AVETMISS reporting, and marketing compliance, with validation being a major concern.

Even though we’ve written about validation several times, let's revisit its definition. ASQA calls validation a quality review of the assessment process.

Simply put, validation confirms which aspects of an RTO's assessment process are right and identifies where improvements are needed. A clear understanding of its main components makes it less intimidating.

Clause 1.8 of the 2015 SRTOs indicates that RTOs need to ensure their assessment systems, including RPL, are compliant with training package requirements and conducted in accordance with the Principles of Assessment and Rules of Evidence.

The standards specify that two types of validation need to be performed.

The first kind of assessment validation ensures your RTO's assessment adheres to the training package requirements within your scope.

The next type of validation confirms assessments are carried out following the principles of assessment and rules of evidence.

Thus, we understand that validation is done before and after the assessment. This article highlights the first type: assessment tool validation.

A Look at the Two Types of Assessment Validation

Understanding Assessment Validation

As noted earlier and in our earlier blog entries, validation is split into two stages: (1) assessment tool validation and (2) post-assessment validation.

Pre-assessment validation or assessment tool validation focuses on the first part of the clause, ensuring that all unit requirements are met and that workbooks are entirely compliant.

Post-assessment validation, in contrast, is about the implementation, requiring Registered Training Organisations to conduct assessments adhering to the Principles of Assessment and Rules of Evidence.

Our focus in this article will be on assessment tool validation.

Methods for Conducting Assessment Tool Validation

With a clear understanding of the two types of validation, let’s focus on assessment tool validation.

When Should You Conduct Assessment Tool Validation?

The objective of assessment tool validation is to ensure that all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.

This means that whenever new learning resources are acquired, you must perform assessment tool validation before student use.

You don’t need to wait until the next scheduled validation in your 5-year cycle. Immediately validate new resources to ensure they’re ready for student use.

However, this isn't the only instance to conduct this type of validation. Perform assessment tool validation when you:

- update your resources
- your new training products get added on scope
- course is reviewed by you against training product updates
- when learning resources are identified as a risk during your risk assessment

ASQA's risk-based regulation approach means RTOs should perform regular risk assessments. If students complain about learning resources, it's a perfect time for assessment tool validation.

Selecting Training Products for Validation

Keep in mind, this validation ensures that all learning resources comply before use. All RTOs must validate resources for each unit.

Starting Assessment Tool Validation: What You Need

Learning Resources

For validating your assessment tools, you will need the full array of your learning resources:

Mapping tool – this should be the first document to examine. It shows which assessment items correspond to unit requirements, facilitating quicker validation.

Learner/student workbook – assess its appropriateness for use as an assessment tool. Verify clear instructions and adequate answer fields. This is often a gap.

Assessor guide/marking guide – ensure that instructions for assessors are sufficient and clear benchmarks for each assessment item exist. Clear benchmarks are essential for reliable assessment outcomes.

Other related resources – such as checklists, registers, and templates created independently from the workbook and marking guide. Validate them to ensure they are suitable for the assessment task and address unit requirements.

Validation Team

Clause 1.11 details the requirements for validation panel members, noting that validation can be conducted by one or more people. Generally, RTOs require participation from all trainers and assessors and may include industry experts.

Overall, your validation panel should have:

Vocational competencies and current industry skills relevant to the unit being validated

Current expertise and skills in vocational teaching and learning

One of the following training and assessment qualifications:

TAE40116 Certificate IV in Training and Assessment or its replacement

Assessment validation checklist/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool assists in both the validation process and documentation. It simplifies identifying how each assessment item corresponds to each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it serves as documented proof that you have validated your resources before student use.

Although ASQA does not recommend or require a particular template for assessment tool validation, many templates are available online. These tools typically have validators review the tools in their entirety to determine if they meet the principles of assessment.

Principles of Assessment Guide Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

Though these templates make validation easier, they often result in judgment errors due to limited space for comments on each assessment item.

It is highly advisable to use a more detailed template for evaluating each unit requirement and its corresponding assessment items. Below is an example:

Element Performance Criteria Assessment Directions Benchmarks Assessment Tools Rectification Recommendations
What do you Need to Check?
What to Examine?

As stated in our blog post Common Problems In Assessment Tools, you must ensure your assessment tools allow trainers to adhere to assessment principles and evidence rules.

Core Principles of Assessment
Fairness – Are equal opportunities and access offered to everyone in the assessment process?

Flexibility – Does the assessment offer various options to demonstrate competence based on different needs and preferences?

Validity – Is the assessment testing what it is meant to test? Is it a valid tool for assessing the required skill or knowledge?

Reliability – Will the assessment give consistent results every time, no matter who conducts the training? Will different assessors consistently decide on skill competence?

Evidence Rules

Validity – Is the evidence verifying that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence sufficient to ensure the learner has the required skills and knowledge?

Authenticity – Is the assessment tool ensuring that the work is the candidate’s own?

Currency – Are the assessment tools in line with current units of competency and contemporary industry practices?

Even though these are often covered in VET professional development and nationally recognised training, many tools still struggle with these requirements.

To avoid using learning resources that leave certain unit requirements unaddressed, ensure you adhere to these guidelines:

Live Up to Your Words

Take note of the verbs used in the unit requirements and make sure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:

Complete each of the following at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:

diapering

bottle preparation, feeding click here infants from bottles, and cleaning equipment

prepare solids and feed infants

respond appropriately to baby signs and cues

prepare babies for sleep and settle them

monitor and promote age-appropriate physical exploration and gross motor skills

Having students describe the process of changing nappies for babies under 12 months doesn’t meet the unit requirement. Unless it’s intended to assess underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.

Be Cautious with Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Pay attention to the numbers. In our CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t enough.

Full Compliance or Not Competent

Observe the lists. As illustrated above, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Be More Specific

Each assessment item must include clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Hence, ensure your instructions are clear and not confusing for students or assessors. For instance:
What kind of information can be included in a work package?
What information can be included in a work package?

Answers might include:

Obligatory resources

Pertinent costs

Time span of activities

Appointed roles and responsibilities

When an assessment item requires multiple answers, indicate the number of answers needed from a student. This way, your assessment is reliable, and the evidence collected is valid.

This is true for assessment items with double-barrelled questions or questions requiring more than one answer at the same time. These can confuse students and assessors, as shown in the sample question below:

Identify a hazard and/or environmental issue in the work area and pick the most effective hazard control hierarchy.

Possible answers include, but are not limited to:

Weather conditions – isolating the work area, engineering, personal protective equipment

Work area and ground conditions – elimination, isolation, engineering

People – isolating, engineering controls, administration

Structural hazards – substitution, isolation, engineering

Chemical hazards – isolation, use of engineering controls, administration

Equipment or machinery – isolation, use of engineering controls, administrative controls

Avoiding double-barrelled questions makes it easier for students to answer and for assessors to judge competence accurately.

Seeing these requirements, you might think, “Don’t learning resource developers offer audit guarantees?” But such guarantees mean you must wait for an audit before rectifying noncompliance. This affects your compliance history, so it’s wiser to take the safe and compliant route.